Analysis review

# Flooring Estimator Project Summary
## Chuck E. Cheese #489 – Wayne, NJ | Minor Remodel #489-2021

---

### PROJECT BASICS

| Item | Detail |
|---|---|
| **Facility Name** | Chuck E. Cheese #489 |
| **Address** | 1639 Route 23 South, Wayne, NJ 07470 |
| **Building Type** | Family Entertainment Center / Restaurant |
| **Project Type** | Minor Interior Remodel |
| **Date** | 10/18/2021 |
| **Architect** | CT Chang, AIA – Hurst, TX |
| **Owner** | C.E.C. Entertainment, Inc., Irving, TX |
| **Gross Building Area** | **12,957 SF** (per cover sheet) |
| **Key Sub-Areas** | Assembly/Restaurant: 4,456 SF; Games Area: 2,849 SF; Kitchen: 932 SF; Storage/Merch: 637 SF |

---

### FLOOR FINISH MATERIALS — PRIMARY SCOPE

The floor finish plan (Sheet A2.0) drives the majority of flooring scope. Six finish designations are called out.

---

#### FF-01 — Porcelain Floor Tile *(most extensively referenced floor material)*
- **Manufacturer:** Interceramic
- **Product:** Norway Narvik Bronze
- **Size:** 8" × 40"
- **Pattern:** Offset install (wood-look plank effect)
- **Grout:** Mapei #7 "Chocolate," 1/16" grout line
- **Transition:** Armstrong vinyl transition strip, Color 60 Jet Black, 1/16"
- **Cove base at tile:** Dilex-AHK 1S 125 TSOB cove joint by Schluter Systems (product VT060125); also see WB-05 below
- **Location:** Public floor areas — order counter, merchandise, games/dining (primary field tile throughout remodeled public zones)
- **Alternate:** Referenced on Sheet A2.2 (product not fully named in extracted text — plan review required)
- **Spec section:** 09310 Porcelain Floor Tile (*"Provide and install all scheduled porcelain floor tile in patterns as shown"*)

---

#### FF-02 — Carpet Tile *(main games/dining floor)*
- **Manufacturer/Supplier:** Interface
- **Pattern:** 1/3 offset running bond
- **Tile size:** 50 cm × 50 cm (~2.7 SF/tile); Layout module = 56 SF
- **Module 01 — "Syncopation":**
  - 188442 Work Green – 10%
  - 188443 Work Blue – 20%
- **Module 02 — "Icebreaker":**
  - 105773 Jet Mist – 70%
- **Contact:** Jerry Arnold, Interface, 415-515-9316, jerry.arnold@interface.com
- **Location:** Throughout public areas (games floor, dining) as indicated on Floor Finish Plan
- **Boundary:** "Boundary of New Carpet" shown on A2.0 plan
- **Adhesive:** FRP Marlite adhesive referenced; Interface 10%-Work Green / 20%-Work Blue adhesive system noted
- **Sub-floor prep:** "Feather out existing sub-floor before installing new carpet" (note 0961)
- **Spec section:** 09697 Carpet (*"Provide and install tile carpet, black transition strips and accessories as scheduled"*)

---

#### FF-03 — Walk-Off / High-Traffic Entrance Carpet Tile *(vestibule only)*
- **Manufacturer:** Interface
- **Style:** 104945 Step Repeat
- **Color:** 999 Onix
- **Size:** 19.69" × 19.69" (50 cm × 50 cm)
- **Location:** Entry vestibule only (small area — see plan note "0963 FF-03 Vestibule")
- **Contact:** Same Interface rep as FF-02

---

#### FF-04 — Porcelain Floor Tile *(restrooms)*
- **Product:** Pinot Series, Color: Gold Meunier
- **Size:** 20" × 20"
- **Pattern:** Diagonal installation
- **Grout:** Mapei #42 Mocha, 1/8" grout line
- **Location:** Restroom floors
- **Alternate:** Slate Attache Multi Brown, 24" × 24"; Grout: Mapei #15 Bone
- **Spec section:** 09310 Porcelain Floor Tile
- **Dal-Tile contact:** Emily Orr, 214-760-1115 / 703-475-0393, emily.orr@daltile.com

---

#### QT-01 — Quarry Floor Tile *(kitchen)*
- **Product:** SV100T, Color: Summitville Red
- **Size:** 6" × 6"
- **Cove base:** Red Base 6" high cove – Summitville (product 3565 / cove-Summitville)
- **Grout:** Manufacturer PBG6025 "Charcoal"
- **Location:** Dry areas in kitchen AND used as wall base in kitchen, office & merchandise areas
- **Manufacturer:** Summitville

---

#### FF-05 — Existing Tile to Match / Remain *(specific areas)*
- **Product:** Interceramic, Color: Indian Stone Autumn Rust
- **Size:** 20" × 20"
- **Pattern:** Diagonal installation
- **Grout:** Mapei #42 Mocha — "Match existing, start point V.I.F."
- **Location:** Designated areas where existing tile remains (V.I.F.); noted on Floor Finish Plan as "match ext'g"
- **Note:** "0929 — Existing flooring to remain in this area" applies to back-of-house zones (kitchen, storage, prep)

---

#### LED Interactive Dance Floor *(specialty sub-floor system)*
- **Description:** Recessed slab installation with 1" self-leveling tile flooring (Ardex)
- **Pan:** Metal pan, primed with Mapei Eco Prim Grip bond-promoting primer
- **Layout:** 6 cells × 5 cells; each cell 500 mm × 500 mm; requires 1/2" perimeter for stair-nose installation
- **Approximate size:** ~9'-11 1/8" × 9'-10 1/8" (~97 SF)
- **Sub-slab:** 6-mil polyethylene water barrier + soil fill
- **Stair-nose transition:** Detail shown at stair nose/transition (TYP) — 3-1/4" profile
- **Requires saw-cut concrete** for recessed slab (demo note 0243)

---

### WALL TILE *(flooring trade typically installs)*

| ID | Type | Manufacturer | Product/Color | Location | Grout |
|---|---|---|---|---|---|
| WT-02 | Glazed Ceramic Wall Tile | Dal-Tile | Not fully named in text | Beverage area walls | — |
| WT-03 | Glazed Ceramic Wall Tile | Marazzi | Sistemc, Color: Gold Meunier Rust | Menu board wall | Mapei #15 Bone |
| WT-04 | (Slat wall — SW-01) | — | — | — | — |
| WT-05 | Glazed Ceramic Wall Tile | Interceramic | Brite Almond | Restroom field walls | Mapei #15 Bone |
| WT-06 | Glazed Porcelain Wall Tile | Interceramic | — | Restroom wall accent | Laticrete 78 Sterling Silver |
| WT-06 alternate | Glazed Porcelain | Daltile | Gainswood (product alternate) | — | — |
| — | Finish Porcelain Tile | Interceramic | 3/4" × 3/4" | Merchandise wall accent | Laticrete 22 Midnight Black |

**WT-03 install note (0933):** Install new wall tile WT-03 around existing digital menu board mounting bracket and beer tap; terminate with vertical Schluter Rondec-MC profile trim, satin anodized aluminum.
**Restroom tile wainscot grout (from schedule):** Laticrete 60 Dusty Gray for interior wainscot/menu board wall.

---

### BASE, TRANSITIONS & TRIM

#### Wall / Cove Base
| ID | Type | Product | Color | Location |
|---|---|---|---|---|
| WB-01 | Vinyl Wall Base | 1/8" gauge interior vinyl wall base | Armstrong Color 60 Jet Black | General public / non-tile areas |
| WB-04 | Glazed Ceramic Tile Base | Interceramic – Brite Almond | — | Restrooms (matches WT-05) |
| WB-05 | Glazed Ceramic Tile Base | Interceramic Norway Narvik | Bronze | Public tile field areas (matches FF-01) |
| QT-01 base | Quarry Tile Cove Base | Summitville 6" high cove | Red | Kitchen, office, merch |
| Restroom cove base | Ceramic cove | Interceramic 6" × 6" | — | Restroom perimeter |

- **Alternate:** Vinyl cove base permitted at order/merch/beverage millwork areas (noted on A2.0)
- **Spec:** *"Provide and install 6" high rubber base as scheduled with adhesive as approved by manufacturer"* (Spec 09660 also references resilient base)

#### Transitions & Nosings
- **Armstrong vinyl transition strip:** 1/16" thick, Color 60 Jet Black — used at FF-01/FF-04 to carpet boundaries
- **Schluter Dilex-AHK** cove joint (VT060125) at tile-to-base junction
- **Schluter Rondec-MC profile** (satin anodized aluminum) at vertical tile terminations / menu board wall
- **Stair nose transition:** 3-1/4" profile detail shown at recessed LED dance floor perimeter
- **Exterior door threshold:** NGP aluminum threshold set in full bed of mastic; standard Mill Finish; Old Castle TH-43 threshold, Mill Finish, 2'-8" (per door schedule)
- **1/2" bull nose tile** shown at FF-03/FF-01 boundary transition detail

---

### SUBSTRATE & PREP

- **General sub-floor repair:** "Repair sub-floor as required" (note 0936, tied to FF-01 install)
- **Carpet sub-floor:** "Feather out existing sub-floor before installing new carpet" (note 0961)
- **Self-leveling compound:** Ardex 1" self-leveling tile flooring specified for LED dance floor recessed metal pan
- **Bond-promoting primer:** Mapei Eco Prim Grip applied to metal pan before Ardex pour
- **Saw-cut concrete:** Required for LED floor recess (demo note 0243) and under-slab conduits (note 0244); core drill only for slab penetrations per General Demo Note 10
- **Reinforcing:** #5 × 18" dowels with 9" embedment @ 18" o.c. along perimeter of new slab work where slab on grade exists
- **Waterproof membrane:** Two-component liquid rubber latex with continuous fiberglass reinforcement equal to Laticrete 9235 — required per wall types in wet areas (restrooms); noted at cement backer board details
- **Cement backer board:** 12"H cement backer board at restroom wet wall base/cove detail
- **Moisture barrier:** 6-mil polyethylene under LED floor slab

---

### DEMOLITION OF EXISTING FLOORING

| Note | Scope |
|---|---|
| **0215** | Demo existing floor tile and base as indicated throughout |
| **0216** | Demo existing carpet, base, transition strips, and rubber tread throughout store |
| **0243** | Saw cut concrete for recessed interactive LED floor |
| **0244** | Saw cut concrete for under-slab conduits |
| General Note 7 | "Remove all floor finishes down to substrate" |

- Existing Marlite wainscot also demoed and replaced (0249) — note for wall-tile crew
- General Demo Note: Do not saw cut concrete slab — **core drill only**; GC to verify slab construction type before cutting

---

### SCOPE & PRICING FACTORS

**Pattern / Special Installation:**
- FF-01 (8"×40") installed in offset/wood-look pattern — labor-intensive large-format plank tile
- FF-04 and FF-05 both installed diagonally — waste factor applies
- FF-02 carpet tile has a specific module layout with percentage blends (10%/20%/70%) requiring careful pre-planning

**Alternates to Price:**
- FF-01 alternate product (see A2.2 — product not fully captured in OCR)
- FF-04 alternate: Slate Attache Multi Brown 24"×24" with Mapei #15 Bone grout
- Vinyl cove base as alternate to tile base at order/merch/bev millwork runs

**Phasing / Operational Considerations:**
- Active retail/restaurant; project described as minor remodel of an operating location
- "Installation of new flooring throughout public spaces; no modification…" (cover sheet)
- FF-05 existing tile remains in back-of-house — clear demarcation with new tile required at transitions

**Specialty Work:**
- Recessed LED dance floor (~97 SF): requires concrete saw-cut, metal pan, Mapei primer, Ardex self-leveling, tile finish — multi-trade coordination
- Schluter trim system used extensively at tile terminations — coordinate with tile installer

**Suppliers to Engage:**
| Supplier | Contact | Materials |
|---|---|---|
| Interceramic | Lori Shurafa, 214-682-7479, Ishurafa@interceramic.com | FF-01, FF-05, WT-05/06, WB-04/05, restroom cove base |
| Dal-Tile / Interceramic | Emily Orr, 703-475-0393, emily.orr@daltile.com | FF-04, WT-02 |
| Marazzi | Taryn Fischer | WT-03 |
| Interface | Jerry Arnold, 415-515-9316, jerry.arnold@interface.com | FF-02, FF-03 |
| Armstrong | — | WB-01 (vinyl base), vinyl transition strip |
| Summitville | — | QT-01 quarry tile + cove base |
| Schluter Systems | — | Dilex-AHK, Rondec-MC trim |

---

### ITEMS REQUIRING CLARIFICATION / FIELD VERIFICATION

- **No room-by-room SF quantities** are provided in the extracted documents. Area takeoffs must be performed from the Floor Finish Plan (Sheet A2.0) directly.
- **FF-01 and FF-05 boundary** — "V.I.F. start point" and "match ext'g" notations mean field dimensions govern; existing tile layout must be confirmed.
- **FF-01 product alternate** on Sheet A2.2 is referenced but not fully named in the OCR text — review A2.2 directly.
- **WT-03 size** — "Glazed Ceramic Tile Marazzi / Sistemc" — tile size not captured in OCR; confirm from finish schedule.
- **WT-06 tile size** — noted as "3/4" × 3/4"" mosaic on merchandise wall; confirm extent and square footage.
- **Rubber base** — Spec 09660 calls for 6" high rubber base; the finish schedule shows vinyl (WB-01) and tile bases (WB-04/05). Confirm which areas receive rubber vs. vinyl vs. tile base.
- **Sheet Vinyl** — abbreviation S.V. appears in the abbreviation legend and the lighting schedule references "Sheet Vinyl 10 [fixtures]" on the cover sheet energy table, but no floor finish designation FF-XX was assigned to sheet vinyl in the plans. Confirm whether sheet vinyl is in scope or if this reference is limited to the energy compliance table.
- **VCT (V.C.T.)** — listed in the abbreviation legend and the cover sheet energy table, but no floor finish designation assigns VCT to any area. Likely legacy abbreviation; confirm with owner/architect.
- **Rubber Tile (RT)** — appears only in the abbreviation legend; no floor finish designation uses it. Likely not in scope.
- **Marlite / FRP wainscot (WM-01)** — wall product installed by GC; confirm if flooring subcontractor is expected to coordinate or install adjacent tile base/cove.

Updated 7/5/2026, 5:50:34 AM